Проигрыватель винила Pioneer PL-50 в отличном косметическом и рабочем состоянии. Cделан в Японии, для японского рынка (100 вольт). Оригинальная крышка, без сколов и трещин, отполирована. Виниловая плёнка стола была заменена на натуральный шпон, фонокабели заменены на качественные Klotz EXTRA LOW CAPACITANCE. Укомплектован новым картриджем Audio-Technica AT-3600L. Могу укомплектовать прекрасной головкой Audio-Technica AT130E/G, в отличном состоянии, на оригинальном хэдшелле.
15 КГ ЗВУКА!!! Если кому интересно, могу скинуть видео на вайбер.
"The build quality of this table is lifetime plus your descendant's lifetime. And then pass it on to a grandkid."
80000 Йен в 1980 г.
Model Rating
Type Cartridgeless player system
Phono Motor Section
Motor Quartz PLL DC servo Hall motor
Drive system Direct drive
Bearing structure SH / rotor system
Turntable Diameter 31cm
Turntable inertia mass 330kg-cm2(including turntable seats)
Number of revolutions 33 1/3, 45 rpm
Rotational speed change Electronic with short stroke switch
Uneven rotation 0.012% or Less (PL-50L, WRMS/FG Direct Reading Method)
0.013% or Less (PL-50, WRMS/FG Direct Reading Method)
0.023% or Less (WRMS/JIS)
S/N 78 dB or more (DIN-B)
65 dB or More (JIS)
Load variation 0% (Needle Pressure 200g or Less)
Start-up characteristic 1/3 turn or less
Starting torque 1.6kg-cm
Speed detection method All-round integration method FG
Rotational speed deviation Not more than 0.002%
Drift Time drift : 0.00008% / h
Temperature drift : 0.00003% / ° C.
Brake mechanism Pure electronic
Tone Arm Section
Type Oil braking system static balance S-shaped pipe arm
Effective length 250mm
Overhang 14mm
Tracking error + 2.1 °, -1.2 °
Needle pressure adjustment Weight 1 Rotation 1g (0.1g scale)
Applicable Cartridge Dead Weight 4g ~ 13g (when using the attached shell)
Height adjustment range + / - 3 mm
Head shell Aluminum Impact Press Head Shell, Dead Weight 10.5g
<General>
Attachment mechanism Quartz lock indicator
Quick stop
Silent Lift Up (Electronic Type, PL-50L Only)
Semiconductors used Quartz : 1
IC:6
Hall element : 4 (3 for PL-50)
LED : 4 (3 for PL-50)
Transistor : 4
Diode : 4
Pwer 100 VAC, 50Hz/60Hz
Power consumption PL-50:8W
PL-50L:13W
External dimensions Width 490x Height 190x Depth 401 mm
Weight 15kg
Sold Separately Damping Adjustment Adapter JP-506 (¥ 8,500)
Replacement Weight JP-507 (¥ 2,400)
